Eccotemp EL22i 6.8 GPM Indoor Liquid Propane Tankless Water Heater Vertical Bundle
Eccotemp EL22i 6.8 GPM Indoor Liquid Propane Tankless Water Heater Vertical Bundle
Product Information
This bundle includes the Eccotemp EL22i Liquid Propane Tankless Water Heater and the Eccotemp 4" Vertical Vent Kit Bundle.
The Eccotemp EL22i Liquid Propane Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and GPM flow rate. The EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.
- CSA Certified for US and Canadian use
- Hot water capacity range: 0.8 - 6.8 GPM
- 45-degree rise: 6.8 GPM
- 50-degree rise: 5.0 GPM
- 70-degree rise: 3.4 GPM
- Digital Remote available for purchase separately
-
Liquid Propane-Powered
-
110-volt UL Listed Power Cord
-
Activation Flow: 0.8 GPM
-
Maximum Flow Rate: 6.8 GPM
-
Energy Factor: 0.80
-
Energy Rating: 82%
-
Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
- 4" Venting Required
What's Included:
- EL22i Indoor Liquid Propane Tankless Water Heater
- Instruction Manual
- Installation Hardware
- Gas Appliance Shut-Off
- Temperature & Pressure-Relief Valve (Included in Canadian shipments only)
- 10 Year Warranty on Heat Exchanger
- 5 Year Warranty on Parts
- 1 x 4" Rain cap
- 1 x 4" Top support/Storm collar
- 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
- 1 x 4" Condensation Drain Pipe
- 1 x 4" Universal appliance adaptor with back flow preventer
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.
EL22i Product Info and Manual
EL22i Warranty
You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.
IMPORTANT NOTE: Not recommended for elevation above 3,000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater! Click here for details.
All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
CSA 2714806
Class 2901 85
Class 2901 05
Class 2902 93
Class 2902 13
| Weight: | 49.20 LBS |
| Dimensions | 17.75" x 29.50" x 9.50" |
| GTIN: | 00851293008958 |
| SKU: | EL22i -LPV |
Product Information
This bundle includes the Eccotemp EL22i Liquid Propane Tankless Water Heater and the Eccotemp 4" Vertical Vent Kit Bundle.
The Eccotemp EL22i Liquid Propane Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and GPM flow rate. The EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.
- CSA Certified for US and Canadian use
- Hot water capacity range: 0.8 - 6.8 GPM
- 45-degree rise: 6.8 GPM
- 50-degree rise: 5.0 GPM
- 70-degree rise: 3.4 GPM
- Digital Remote available for purchase separately
-
Liquid Propane-Powered
-
110-volt UL Listed Power Cord
-
Activation Flow: 0.8 GPM
-
Maximum Flow Rate: 6.8 GPM
-
Energy Factor: 0.80
-
Energy Rating: 82%
-
Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
- 4" Venting Required
What's Included:
- EL22i Indoor Liquid Propane Tankless Water Heater
- Instruction Manual
- Installation Hardware
- Gas Appliance Shut-Off
- Temperature & Pressure-Relief Valve (Included in Canadian shipments only)
- 10 Year Warranty on Heat Exchanger
- 5 Year Warranty on Parts
- 1 x 4" Rain cap
- 1 x 4" Top support/Storm collar
- 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
- 1 x 4" Condensation Drain Pipe
- 1 x 4" Universal appliance adaptor with back flow preventer
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.
EL22i Product Info and Manual
EL22i Warranty
You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.
IMPORTANT NOTE: Not recommended for elevation above 3,000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater! Click here for details.
All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
CSA 2714806
Class 2901 85
Class 2901 05
Class 2902 93
Class 2902 13
| Weight: | 49.20 LBS |
| Dimensions | 17.75" x 29.50" x 9.50" |
| GTIN: | 00851293008958 |
| SKU: | EL22i -LPV |
This bundle includes the Eccotemp EL22i Liquid Propane Tankless Water Heater and the Eccotemp 4" Vertical Vent Kit Bundle.
The Eccotemp EL22i Liquid Propane Tankless Water Heater is the largest indoor model of the Eccotemp tankless line. This model has a sleek, black tempered glass casing with automatic temperature controls and a touch screen with an LED digital display that shows the output temperature reading and GPM flow rate. The EL22i is rated at an impressive 6.8 gallons per minute and has a maximum BTU rate of 140,000. Whether you use natural gas or liquid propane the EL22i is the perfect solution for all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications.
- CSA Certified for US and Canadian use
- Hot water capacity range: 0.8 - 6.8 GPM
- 45-degree rise: 6.8 GPM
- 50-degree rise: 5.0 GPM
- 70-degree rise: 3.4 GPM
- Digital Remote available for purchase separately
-
Liquid Propane-Powered
-
110-volt UL Listed Power Cord
-
Activation Flow: 0.8 GPM
-
Maximum Flow Rate: 6.8 GPM
-
Energy Factor: 0.80
-
Energy Rating: 82%
-
Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
- 4" Venting Required
What's Included:
- EL22i Indoor Liquid Propane Tankless Water Heater
- Instruction Manual
- Installation Hardware
- Gas Appliance Shut-Off
- Temperature & Pressure-Relief Valve (Included in Canadian shipments only)
- 10 Year Warranty on Heat Exchanger
- 5 Year Warranty on Parts
- 1 x 4" Rain cap
- 1 x 4" Top support/Storm collar
- 1 x 4" Adjustable roof flashing (normal 30 degree flashing)
- 1 x 4" Condensation Drain Pipe
- 1 x 4" Universal appliance adaptor with back flow preventer
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.
EL22i Product Info and Manual
EL22i Warranty
You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.
IMPORTANT NOTE: Not recommended for elevation above 3,000 ft and cannot be used for HYDRONIC SYSTEM, RECIRCULATING or FLOOR HEATING.
Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater! Click here for details.
All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us here to speak with a customer service agent.
CSA 2714806
Class 2901 85
Class 2901 05
Class 2902 93
Class 2902 13
| Weight: | 49.20 LBS |
| Dimensions | 17.75" x 29.50" x 9.50" |
| GTIN: | 00851293008958 |
| SKU: | EL22i -LPV |
