Eccotemp i12-NG Vertical Bundle (Not CSA Approved)

( 0 ) Write a review
789.00CAD 649.00CAD (You save 140.00CAD)

Eccotemp i12-NG Vertical Bundle (Not CSA Approved)

( 0 )

Eccotemp i12-NG Vertical Bundle (Not CSA Approved)

( 0 ) Write a review
789.00CAD 649.00CAD (You save 140.00CAD)

Product Information


 

This bundle includes the i12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical vent kit.

Eccotemp i12-NG

The Eccotemp i12-NG has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-NG Tankless Water Heater is a natural gas fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-NG is perfect for vacation cabins, cottages and smaller homes.

The i12-NG comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

The i12-NG offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

Eccotemp i12 Manual

Some additional Features

  • True 1/2" NPT water fittings
  • Tempered glass front and back panels
  • Child locking technology
  • Fully automatic temperature controls
  • Natural Gas Powered
  • Sleek modern design
  • 4 GPM flow capacity
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • Power ventilation for safety and efficiency
  • Tested-Safe Electronic Ignition System
  • 80,000 BTU
  • LED temperature display
  • Weighs only 33 pounds
  • Unit Dimensions are 15”x24”x4”
  • Stainless vent kit included
  • Uses gas only when hot water is on
  • Requires standard household 120 volt electric outlet
  • UL listed electrical components
  • Two year warranty
  • Hot water capacity range: 0.6 - 4.0 GPM
  • Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with back flow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Vertical Ventilation kit 3"

This 3" single walled Z-Flex Vertical vent kit is for vertical installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also remember A max vent run of 20 FT. subtracting 4 Ft. for every 90 Degree elbow in the run.

Includes:

  • 1 x 3" Rain cap
  • 1 x 3" Top support/Storm collar
  • 1 x 3" Adjustable roof flashing (specify either normal or steep flashing)
  • 1 x 3" Paloma Appliance Adapter
  • 1 x 3" Back flow preventer 

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

PLEASE NOTE:
This product does not take part in any 3rd party certification at this time.
This product ships from the US which usually ships within 2 business days and may be subject to a duty fee upon arrival.
All U.S. based product returns are at the discretion and responsibility of the end user.

 

 

 

Weight: 41.00 LBS
Dimensions 29.00" x 17.00" x 11.00"
GTIN: 00891876002805
SKU: i12-NGV
0 (0 Reviews) Write a review

Product Information


 

This bundle includes the i12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical vent kit.

Eccotemp i12-NG

The Eccotemp i12-NG has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-NG Tankless Water Heater is a natural gas fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-NG is perfect for vacation cabins, cottages and smaller homes.

The i12-NG comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

The i12-NG offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

Eccotemp i12 Manual

Some additional Features

  • True 1/2" NPT water fittings
  • Tempered glass front and back panels
  • Child locking technology
  • Fully automatic temperature controls
  • Natural Gas Powered
  • Sleek modern design
  • 4 GPM flow capacity
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • Power ventilation for safety and efficiency
  • Tested-Safe Electronic Ignition System
  • 80,000 BTU
  • LED temperature display
  • Weighs only 33 pounds
  • Unit Dimensions are 15”x24”x4”
  • Stainless vent kit included
  • Uses gas only when hot water is on
  • Requires standard household 120 volt electric outlet
  • UL listed electrical components
  • Two year warranty
  • Hot water capacity range: 0.6 - 4.0 GPM
  • Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with back flow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Vertical Ventilation kit 3"

This 3" single walled Z-Flex Vertical vent kit is for vertical installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also remember A max vent run of 20 FT. subtracting 4 Ft. for every 90 Degree elbow in the run.

Includes:

  • 1 x 3" Rain cap
  • 1 x 3" Top support/Storm collar
  • 1 x 3" Adjustable roof flashing (specify either normal or steep flashing)
  • 1 x 3" Paloma Appliance Adapter
  • 1 x 3" Back flow preventer 

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

PLEASE NOTE:
This product does not take part in any 3rd party certification at this time.
This product ships from the US which usually ships within 2 business days and may be subject to a duty fee upon arrival.
All U.S. based product returns are at the discretion and responsibility of the end user.

 

 

 

Weight: 41.00 LBS
Dimensions 29.00" x 17.00" x 11.00"
GTIN: 00891876002805
SKU: i12-NGV
0 (0 Reviews) Write a review
  • Description
  • Specification
  • Reviews

  •  

    This bundle includes the i12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical vent kit.

    Eccotemp i12-NG

    The Eccotemp i12-NG has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-NG Tankless Water Heater is a natural gas fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-NG is perfect for vacation cabins, cottages and smaller homes.

    The i12-NG comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

    The i12-NG offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

    Eccotemp i12 Manual

    Some additional Features

    • True 1/2" NPT water fittings
    • Tempered glass front and back panels
    • Child locking technology
    • Fully automatic temperature controls
    • Natural Gas Powered
    • Sleek modern design
    • 4 GPM flow capacity
    • Field tested to 5500 ft. elevation (not recommended to be used any higher)
    • Power ventilation for safety and efficiency
    • Tested-Safe Electronic Ignition System
    • 80,000 BTU
    • LED temperature display
    • Weighs only 33 pounds
    • Unit Dimensions are 15”x24”x4”
    • Stainless vent kit included
    • Uses gas only when hot water is on
    • Requires standard household 120 volt electric outlet
    • UL listed electrical components
    • Two year warranty
    • Hot water capacity range: 0.6 - 4.0 GPM
    • Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

    Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

    2.5 to 3" Stainless steel adapter

    This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with back flow preventer to ensure that freezing air does not come back through the vent pipe.

    Eccotemp Vertical Ventilation kit 3"

    This 3" single walled Z-Flex Vertical vent kit is for vertical installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also remember A max vent run of 20 FT. subtracting 4 Ft. for every 90 Degree elbow in the run.

    Includes:

    • 1 x 3" Rain cap
    • 1 x 3" Top support/Storm collar
    • 1 x 3" Adjustable roof flashing (specify either normal or steep flashing)
    • 1 x 3" Paloma Appliance Adapter
    • 1 x 3" Back flow preventer 

    Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

    PLEASE NOTE:
    This product does not take part in any 3rd party certification at this time.
    This product ships from the US which usually ships within 2 business days and may be subject to a duty fee upon arrival.
    All U.S. based product returns are at the discretion and responsibility of the end user.

     

     

     

    Weight: 41.00 LBS
    Dimensions 29.00" x 17.00" x 11.00"
    GTIN: 00891876002805
    SKU: i12-NGV
    0 (0 Reviews) Write a review

    Related Products