Eccotemp i12-NG Horizontal Bundle (Not CSA Approved)

Eccotemp i12-NG Horizontal Bundle (Not CSA Approved)

( 0 ) Write a review
$1,199.00 $889.00 (You save $310.00)
Expected release date is May 31st 2024
Expected release date is May 31st 2024

Eccotemp i12-NG Horizontal Bundle (Not CSA Approved)

( 0 )

Eccotemp i12-NG Horizontal Bundle (Not CSA Approved)

( 0 ) Write a review
$1,199.00 $889.00 (You save $310.00)
Expected release date is May 31st 2024
Expected release date is May 31st 2024

Product Information

The Eccotemp i12 Indoor Natural Gas Tankless Water Heater is one of the most advanced indoor models of the Eccotemp tankless line. The included Eccotemp 3” category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 3” Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, wall thimble, 12” straight pipe and appliance adapter.

Rated at an impressive 4.0 GPM with a temperature rise of 38 degrees and 80,000 BTU per hour, the Eccotemp i12-NG can meet all your hot-water needs! Eccotemp’s advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.

We recommend the Eccotemp i12-NG for smaller sized single-family homes, apartments, condos, and cabins as well as small commercial applications. Using 1-2 hot water applications simultaneously is a breeze with the Eccotemp i12-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford.

The compact, wall mounted Eccotemp i12-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Digital Display and PCB. With its fully automated control system, the Eccotemp i12-NG only pulls about .5 amps during operation, making it an ideal for low energy consumption and efficiency.

The Eccotemp i12 has been tested at elevations up to 2000 feet. Installation and use of the Eccotemp i12 above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp i12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

 

  • Rated for 1-2 applications used simultaneously means that taking a shower and running two sinks at the same time is effortless. The Eccotemp i12 is ideal for hot water heating applications in smaller sized residential single-family home, condo, cabin, apartment or Light commercial use
  • Rated at 4.0 GPM at 80,000 BTUs with a temperature rise of 38 degrees, this ultra-efficient tankless water heater is ideal for just about every single-family home
  • Advanced Generation 3 Computer board with high performance processing and smart adjust technology built in. Our proprietary developed programming meets and exceeds today’s consumer demands
  • With advanced incoming and outgoing water temperature sensor technology, you always have total confidence when it comes to safety
  • Limited Manufacturer Warranty (Heat Exchanger: 5 Years, Parts: 2 Years, Free Accessories - fittings, accessories, hardware pack, etc.: 30 days), live chat, appointments for product support, self-help guides will give you peace of mind that the Eccotemp i12 will keep you in hot water for years
  • What's Included: i12-NG tankless water heater, 3” horizontal vent kit, wall thimble, 15” termination pipe, mounting hardware, and installation manual
  • 3” Horizontal Vent Kit Includes: a termination hood with backflow preventer, 12” straight pipe, 90-degree elbow, wall thimble, and appliance adapter
  • The Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long
  • Not CSA Certified


To ensure the secure and confirmed delivery of your purchase, Eccotemp requires a signature for all deliveries.

 

 

 

Weight: 38.00 LBS
Dimensions 15.70" x 27.50" x 10.90"
GTIN: 00891876002782
SKU: i12-NGH
0 (0 Reviews) Write a review

Product Information

The Eccotemp i12 Indoor Natural Gas Tankless Water Heater is one of the most advanced indoor models of the Eccotemp tankless line. The included Eccotemp 3” category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 3” Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, wall thimble, 12” straight pipe and appliance adapter.

Rated at an impressive 4.0 GPM with a temperature rise of 38 degrees and 80,000 BTU per hour, the Eccotemp i12-NG can meet all your hot-water needs! Eccotemp’s advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.

We recommend the Eccotemp i12-NG for smaller sized single-family homes, apartments, condos, and cabins as well as small commercial applications. Using 1-2 hot water applications simultaneously is a breeze with the Eccotemp i12-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford.

The compact, wall mounted Eccotemp i12-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Digital Display and PCB. With its fully automated control system, the Eccotemp i12-NG only pulls about .5 amps during operation, making it an ideal for low energy consumption and efficiency.

The Eccotemp i12 has been tested at elevations up to 2000 feet. Installation and use of the Eccotemp i12 above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp i12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

 

  • Rated for 1-2 applications used simultaneously means that taking a shower and running two sinks at the same time is effortless. The Eccotemp i12 is ideal for hot water heating applications in smaller sized residential single-family home, condo, cabin, apartment or Light commercial use
  • Rated at 4.0 GPM at 80,000 BTUs with a temperature rise of 38 degrees, this ultra-efficient tankless water heater is ideal for just about every single-family home
  • Advanced Generation 3 Computer board with high performance processing and smart adjust technology built in. Our proprietary developed programming meets and exceeds today’s consumer demands
  • With advanced incoming and outgoing water temperature sensor technology, you always have total confidence when it comes to safety
  • Limited Manufacturer Warranty (Heat Exchanger: 5 Years, Parts: 2 Years, Free Accessories - fittings, accessories, hardware pack, etc.: 30 days), live chat, appointments for product support, self-help guides will give you peace of mind that the Eccotemp i12 will keep you in hot water for years
  • What's Included: i12-NG tankless water heater, 3” horizontal vent kit, wall thimble, 15” termination pipe, mounting hardware, and installation manual
  • 3” Horizontal Vent Kit Includes: a termination hood with backflow preventer, 12” straight pipe, 90-degree elbow, wall thimble, and appliance adapter
  • The Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long
  • Not CSA Certified


To ensure the secure and confirmed delivery of your purchase, Eccotemp requires a signature for all deliveries.

 

 

 

Weight: 38.00 LBS
Dimensions 15.70" x 27.50" x 10.90"
GTIN: 00891876002782
SKU: i12-NGH
0 (0 Reviews) Write a review

The Eccotemp i12 Indoor Natural Gas Tankless Water Heater is one of the most advanced indoor models of the Eccotemp tankless line. The included Eccotemp 3” category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 3” Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, wall thimble, 12” straight pipe and appliance adapter.

Rated at an impressive 4.0 GPM with a temperature rise of 38 degrees and 80,000 BTU per hour, the Eccotemp i12-NG can meet all your hot-water needs! Eccotemp’s advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.

We recommend the Eccotemp i12-NG for smaller sized single-family homes, apartments, condos, and cabins as well as small commercial applications. Using 1-2 hot water applications simultaneously is a breeze with the Eccotemp i12-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford.

The compact, wall mounted Eccotemp i12-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Digital Display and PCB. With its fully automated control system, the Eccotemp i12-NG only pulls about .5 amps during operation, making it an ideal for low energy consumption and efficiency.

The Eccotemp i12 has been tested at elevations up to 2000 feet. Installation and use of the Eccotemp i12 above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp i12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

 

  • Rated for 1-2 applications used simultaneously means that taking a shower and running two sinks at the same time is effortless. The Eccotemp i12 is ideal for hot water heating applications in smaller sized residential single-family home, condo, cabin, apartment or Light commercial use
  • Rated at 4.0 GPM at 80,000 BTUs with a temperature rise of 38 degrees, this ultra-efficient tankless water heater is ideal for just about every single-family home
  • Advanced Generation 3 Computer board with high performance processing and smart adjust technology built in. Our proprietary developed programming meets and exceeds today’s consumer demands
  • With advanced incoming and outgoing water temperature sensor technology, you always have total confidence when it comes to safety
  • Limited Manufacturer Warranty (Heat Exchanger: 5 Years, Parts: 2 Years, Free Accessories - fittings, accessories, hardware pack, etc.: 30 days), live chat, appointments for product support, self-help guides will give you peace of mind that the Eccotemp i12 will keep you in hot water for years
  • What's Included: i12-NG tankless water heater, 3” horizontal vent kit, wall thimble, 15” termination pipe, mounting hardware, and installation manual
  • 3” Horizontal Vent Kit Includes: a termination hood with backflow preventer, 12” straight pipe, 90-degree elbow, wall thimble, and appliance adapter
  • The Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long
  • Not CSA Certified


To ensure the secure and confirmed delivery of your purchase, Eccotemp requires a signature for all deliveries.

 

 

 

Weight: 38.00 LBS
Dimensions 15.70" x 27.50" x 10.90"
GTIN: 00891876002782
SKU: i12-NGH
0 (0 Reviews) Write a review

Related Products