Eccotemp i12-NG Indoor Tankless Water Heater (Not CSA Approved)

Eccotemp i12-NG Indoor Tankless Water Heater (Not CSA Approved)

( 0 ) Write a review
$659.00 $569.00 (You save $90.00)

Eccotemp i12-NG Indoor Tankless Water Heater (Not CSA Approved)

( 0 )

Eccotemp i12-NG Indoor Tankless Water Heater (Not CSA Approved)

( 0 ) Write a review
$659.00 $569.00 (You save $90.00)

Product Information

Experience the cutting-edge technology of the Eccotemp i12 Indoor Natural Gas Tankless Water Heater, one of the most advanced models in the Eccotemp tankless line. With an impressive rating of 4.0 GPM and a temperature rise of 38 degrees at 80,000 BTU per hour, the Eccotemp i12-NG meets all your hot water needs effortlessly. Its innovative 0.7 GPM low flow ignition technology ensures continuous hot water without any cold spots.

The Eccotemp i12-NG is perfect for smaller single-family homes, apartments, condos, cabins, and small commercial applications. It can easily handle 1-2 hot water applications simultaneously. Thanks to the upgraded Product Control Board (PCB) and a new gas modulating valve, you can enjoy superior temperature performance at an affordable price.

This compact, wall-mounted tankless water boiler features a 110/120-volt UL listed power cord that powers the internal exhaust fan, digital display, and PCB. With a fully automated control system, the Eccotemp i12-NG only consumes about 12 amps during operation, making it highly efficient and ideal for low energy consumption.

The Eccotemp i12 has been tested for use at elevations up to 2000 feet. Usage above 2000 feet may impact the product’s efficiency and performance.

IMPORTANT NOTE: This product is not suitable for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

Key Features:

  • Designed for 1-2 simultaneous applications, making it easy to take a shower while running two sinks. Ideal for hot water needs in smaller residential single-family homes, condos, cabins, apartments, or light commercial use.
  • Rated at 4.0 GPM with 80,000 BTUs and a temperature rise of 38 degrees, making it a perfect fit for various single-family homes.
  • Equipped with an advanced Generation 3 computer board featuring high-performance processing and smart adjust technology, exceeding today’s consumer expectations.
  • Advanced incoming and outgoing water temperature sensor technology ensures safety and reliability.
  • Can be paired with the patented EZ-Flush descaling kit to maintain peak efficiency throughout the year.
  • Limited Manufacturer Warranty (Heat Exchanger: 5 Years, Components: 2 Years, Parts/Accessories: 30 days), live chat, and self-help guides will give you peace of mind that the Eccotemp i12 will keep you in hot water for years
  • What's Included: i12-NG tankless water heater, 2.5-inch Wall Thimble, 2.5-inch x 15-inch Termination Pipe, 2.5-inch x 90-degree Elbow, mounting hardware, and installation manual
  • The Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long
  • Note: This product is not CSA certified.


All purchases valued at $75 or above will be shipped with SIGNATURE REQUIRED. If you wish to remove the SIGNATURE REQUIRED please contact Customer Service. Please Note: By opting out of SIGNATURE REQUIRED, you release Eccotemp Canada from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us to speak with a customer service agent.

Weight: 29.00 LBS
Dimensions 15.70" x 27.50" x 10.90"
GTIN: 00891876002621
SKU: i12-NG
0 (0 Reviews) Write a review

Product Information

Experience the cutting-edge technology of the Eccotemp i12 Indoor Natural Gas Tankless Water Heater, one of the most advanced models in the Eccotemp tankless line. With an impressive rating of 4.0 GPM and a temperature rise of 38 degrees at 80,000 BTU per hour, the Eccotemp i12-NG meets all your hot water needs effortlessly. Its innovative 0.7 GPM low flow ignition technology ensures continuous hot water without any cold spots.

The Eccotemp i12-NG is perfect for smaller single-family homes, apartments, condos, cabins, and small commercial applications. It can easily handle 1-2 hot water applications simultaneously. Thanks to the upgraded Product Control Board (PCB) and a new gas modulating valve, you can enjoy superior temperature performance at an affordable price.

This compact, wall-mounted tankless water boiler features a 110/120-volt UL listed power cord that powers the internal exhaust fan, digital display, and PCB. With a fully automated control system, the Eccotemp i12-NG only consumes about 12 amps during operation, making it highly efficient and ideal for low energy consumption.

The Eccotemp i12 has been tested for use at elevations up to 2000 feet. Usage above 2000 feet may impact the product’s efficiency and performance.

IMPORTANT NOTE: This product is not suitable for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

Key Features:

  • Designed for 1-2 simultaneous applications, making it easy to take a shower while running two sinks. Ideal for hot water needs in smaller residential single-family homes, condos, cabins, apartments, or light commercial use.
  • Rated at 4.0 GPM with 80,000 BTUs and a temperature rise of 38 degrees, making it a perfect fit for various single-family homes.
  • Equipped with an advanced Generation 3 computer board featuring high-performance processing and smart adjust technology, exceeding today’s consumer expectations.
  • Advanced incoming and outgoing water temperature sensor technology ensures safety and reliability.
  • Can be paired with the patented EZ-Flush descaling kit to maintain peak efficiency throughout the year.
  • Limited Manufacturer Warranty (Heat Exchanger: 5 Years, Components: 2 Years, Parts/Accessories: 30 days), live chat, and self-help guides will give you peace of mind that the Eccotemp i12 will keep you in hot water for years
  • What's Included: i12-NG tankless water heater, 2.5-inch Wall Thimble, 2.5-inch x 15-inch Termination Pipe, 2.5-inch x 90-degree Elbow, mounting hardware, and installation manual
  • The Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long
  • Note: This product is not CSA certified.


All purchases valued at $75 or above will be shipped with SIGNATURE REQUIRED. If you wish to remove the SIGNATURE REQUIRED please contact Customer Service. Please Note: By opting out of SIGNATURE REQUIRED, you release Eccotemp Canada from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us to speak with a customer service agent.

Weight: 29.00 LBS
Dimensions 15.70" x 27.50" x 10.90"
GTIN: 00891876002621
SKU: i12-NG
0 (0 Reviews) Write a review

Experience the cutting-edge technology of the Eccotemp i12 Indoor Natural Gas Tankless Water Heater, one of the most advanced models in the Eccotemp tankless line. With an impressive rating of 4.0 GPM and a temperature rise of 38 degrees at 80,000 BTU per hour, the Eccotemp i12-NG meets all your hot water needs effortlessly. Its innovative 0.7 GPM low flow ignition technology ensures continuous hot water without any cold spots.

The Eccotemp i12-NG is perfect for smaller single-family homes, apartments, condos, cabins, and small commercial applications. It can easily handle 1-2 hot water applications simultaneously. Thanks to the upgraded Product Control Board (PCB) and a new gas modulating valve, you can enjoy superior temperature performance at an affordable price.

This compact, wall-mounted tankless water boiler features a 110/120-volt UL listed power cord that powers the internal exhaust fan, digital display, and PCB. With a fully automated control system, the Eccotemp i12-NG only consumes about 12 amps during operation, making it highly efficient and ideal for low energy consumption.

The Eccotemp i12 has been tested for use at elevations up to 2000 feet. Usage above 2000 feet may impact the product’s efficiency and performance.

IMPORTANT NOTE: This product is not suitable for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

Key Features:

  • Designed for 1-2 simultaneous applications, making it easy to take a shower while running two sinks. Ideal for hot water needs in smaller residential single-family homes, condos, cabins, apartments, or light commercial use.
  • Rated at 4.0 GPM with 80,000 BTUs and a temperature rise of 38 degrees, making it a perfect fit for various single-family homes.
  • Equipped with an advanced Generation 3 computer board featuring high-performance processing and smart adjust technology, exceeding today’s consumer expectations.
  • Advanced incoming and outgoing water temperature sensor technology ensures safety and reliability.
  • Can be paired with the patented EZ-Flush descaling kit to maintain peak efficiency throughout the year.
  • Limited Manufacturer Warranty (Heat Exchanger: 5 Years, Components: 2 Years, Parts/Accessories: 30 days), live chat, and self-help guides will give you peace of mind that the Eccotemp i12 will keep you in hot water for years
  • What's Included: i12-NG tankless water heater, 2.5-inch Wall Thimble, 2.5-inch x 15-inch Termination Pipe, 2.5-inch x 90-degree Elbow, mounting hardware, and installation manual
  • The Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long
  • Note: This product is not CSA certified.


All purchases valued at $75 or above will be shipped with SIGNATURE REQUIRED. If you wish to remove the SIGNATURE REQUIRED please contact Customer Service. Please Note: By opting out of SIGNATURE REQUIRED, you release Eccotemp Canada from all liability of lost or stolen packages. Call 1-866-356-1992 or chat with us to speak with a customer service agent.

Weight: 29.00 LBS
Dimensions 15.70" x 27.50" x 10.90"
GTIN: 00891876002621
SKU: i12-NG
0 (0 Reviews) Write a review

Related Products