Eccotemp i12-LP Horizontal Vent Kit (Not CSA Approved)

( 0 ) Write a review
789.00CAD 649.00CAD (You save 140.00CAD)
On backorder until Nov 12th 2020 . Backorder dates can change at anytime.
On backorder until Nov 12th 2020 . Backorder dates can change at anytime.

Eccotemp i12-LP Horizontal Vent Kit (Not CSA Approved)

( 0 )

Eccotemp i12-LP Horizontal Vent Kit (Not CSA Approved)

( 0 ) Write a review
789.00CAD 649.00CAD (You save 140.00CAD)
On backorder until Nov 12th 2020 . Backorder dates can change at anytime.
On backorder until Nov 12th 2020 . Backorder dates can change at anytime.

Product Information



 

This bundle includes the i12-LP Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Horizontal vent kit.

Eccotemp i12-LP

The Eccotemp i12-LP has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-LP Tankless Water Heater is a liquid propane fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-LP is perfect for vacation cabins, cottages and smaller homes.

The i12 comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

The i12-LP offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

Eccotemp i12 Manual

Some additional Features

  • True 1/2" NPT water fittings
  • Tempered glass front and back panels
  • Child locking technology
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • Fully automatic temperature controls
  • Liquid Propane Powered
  • Sleek modern design
  • 4 GPM flow capacity
  • Power ventilation for safety and efficiency
  • Tested-Safe Electronic Ignition System
  • 80,000 BTU
  • LED temperature display
  • Weighs only 33 pounds
  • Unit Dimensions are 15”x24”x4”
  • Stainless vent kit included
  • Uses gas only when hot water is on
  • Requires standard household 120 volt electric outlet
  • UL listed electrical components
  • Two year warranty
  • Hot water capacity range: 0.6 - 4.0 GPM
  • Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using the Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with back flow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Vent Kit 3"

3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit. This vent kit is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

  • (1) 3" x 90 Degree Elbow
  • (1) 3" x 1' Pipe
  • (1) 3" Wall Thimble
  • (1) 3" Paloma Appliance Adapter
  • (1) Termination Hood with back flow preventer

Made of AL-294C stainless steel.  This is Category II/III and UL approved.

PLEASE NOTE:
This product does not take part in any 3rd party certification at this time.
This product ships from the US which usually ships within 2 business days and may be subject to a duty fee upon arrival.
All U.S. based product returns are at the discretion and responsibility of the end user.

 

 

Weight: 41.00 LBS
Dimensions 29.00" x 17.00" x 11.00"
GTIN: 00891876002775
SKU: i12-LPH
0 (0 Reviews) Write a review

Product Information



 

This bundle includes the i12-LP Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Horizontal vent kit.

Eccotemp i12-LP

The Eccotemp i12-LP has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-LP Tankless Water Heater is a liquid propane fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-LP is perfect for vacation cabins, cottages and smaller homes.

The i12 comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

The i12-LP offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

Eccotemp i12 Manual

Some additional Features

  • True 1/2" NPT water fittings
  • Tempered glass front and back panels
  • Child locking technology
  • Field tested to 5500 ft. elevation (not recommended to be used any higher)
  • Fully automatic temperature controls
  • Liquid Propane Powered
  • Sleek modern design
  • 4 GPM flow capacity
  • Power ventilation for safety and efficiency
  • Tested-Safe Electronic Ignition System
  • 80,000 BTU
  • LED temperature display
  • Weighs only 33 pounds
  • Unit Dimensions are 15”x24”x4”
  • Stainless vent kit included
  • Uses gas only when hot water is on
  • Requires standard household 120 volt electric outlet
  • UL listed electrical components
  • Two year warranty
  • Hot water capacity range: 0.6 - 4.0 GPM
  • Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using the Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with back flow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Vent Kit 3"

3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit. This vent kit is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

  • (1) 3" x 90 Degree Elbow
  • (1) 3" x 1' Pipe
  • (1) 3" Wall Thimble
  • (1) 3" Paloma Appliance Adapter
  • (1) Termination Hood with back flow preventer

Made of AL-294C stainless steel.  This is Category II/III and UL approved.

PLEASE NOTE:
This product does not take part in any 3rd party certification at this time.
This product ships from the US which usually ships within 2 business days and may be subject to a duty fee upon arrival.
All U.S. based product returns are at the discretion and responsibility of the end user.

 

 

Weight: 41.00 LBS
Dimensions 29.00" x 17.00" x 11.00"
GTIN: 00891876002775
SKU: i12-LPH
0 (0 Reviews) Write a review
  • Description
  • Specification
  • Reviews


  •  

    This bundle includes the i12-LP Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Horizontal vent kit.

    Eccotemp i12-LP

    The Eccotemp i12-LP has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-LP Tankless Water Heater is a liquid propane fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-LP is perfect for vacation cabins, cottages and smaller homes.

    The i12 comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

    The i12-LP offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

    Eccotemp i12 Manual

    Some additional Features

    • True 1/2" NPT water fittings
    • Tempered glass front and back panels
    • Child locking technology
    • Field tested to 5500 ft. elevation (not recommended to be used any higher)
    • Fully automatic temperature controls
    • Liquid Propane Powered
    • Sleek modern design
    • 4 GPM flow capacity
    • Power ventilation for safety and efficiency
    • Tested-Safe Electronic Ignition System
    • 80,000 BTU
    • LED temperature display
    • Weighs only 33 pounds
    • Unit Dimensions are 15”x24”x4”
    • Stainless vent kit included
    • Uses gas only when hot water is on
    • Requires standard household 120 volt electric outlet
    • UL listed electrical components
    • Two year warranty
    • Hot water capacity range: 0.6 - 4.0 GPM
    • Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

    Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using the Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  Click here for details.

    2.5 to 3" Stainless steel adapter

    This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with back flow preventer to ensure that freezing air does not come back through the vent pipe.

    Eccotemp Horizontal Vent Kit 3"

    3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit. This vent kit is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

    • (1) 3" x 90 Degree Elbow
    • (1) 3" x 1' Pipe
    • (1) 3" Wall Thimble
    • (1) 3" Paloma Appliance Adapter
    • (1) Termination Hood with back flow preventer

    Made of AL-294C stainless steel.  This is Category II/III and UL approved.

    PLEASE NOTE:
    This product does not take part in any 3rd party certification at this time.
    This product ships from the US which usually ships within 2 business days and may be subject to a duty fee upon arrival.
    All U.S. based product returns are at the discretion and responsibility of the end user.

     

     

    Weight: 41.00 LBS
    Dimensions 29.00" x 17.00" x 11.00"
    GTIN: 00891876002775
    SKU: i12-LPH
    0 (0 Reviews) Write a review

    Related Products