L10 Gas-Water Valve Assembly
L10 Gas-Water Valve Assembly
Product Information
This is the entire Eccotemp gas-water valve for the L10, completely assembled. Please make sure to order the flare fitting that screws onto the gas line if yours cannot be removed from your existing water heater. Always be sure to use pipe tape on the non-flared connections and check for gas leaks before use. If you feel you may need to replace your current gas-water valve assembly, please call Technical Support at 866-356-1992 for advice.
Customer assumes all liability when purchasing replacement parts.
Weight: | 3.00 LBS |
Dimensions | 10.00" x 10.00" x 10.00" |
GTIN: | 1012029 |
SKU: | 1012029 |
Gas/Water valve assembly
Replaced very quickly. Unit back in service. Problem with the old one was the diaphragm. Wish I could purchase just that and then I would have a spare.
Fixed my issues
Was experiencing low water flow issues. After ruling out the other causes, it was determined that the diaphragm contained within this unit was likely punctured from pulling in debris over the past 4 years of use (I pull from a lake). Replacing this unit was easy and the unit runs like new again.
GREAT
The hubby took out the old part and put the new one in in no time flat.. works great.....Also it got here much quicker than I expected.
Product Information
This is the entire Eccotemp gas-water valve for the L10, completely assembled. Please make sure to order the flare fitting that screws onto the gas line if yours cannot be removed from your existing water heater. Always be sure to use pipe tape on the non-flared connections and check for gas leaks before use. If you feel you may need to replace your current gas-water valve assembly, please call Technical Support at 866-356-1992 for advice.
Customer assumes all liability when purchasing replacement parts.
Weight: | 3.00 LBS |
Dimensions | 10.00" x 10.00" x 10.00" |
GTIN: | 1012029 |
SKU: | 1012029 |
Gas/Water valve assembly
Replaced very quickly. Unit back in service. Problem with the old one was the diaphragm. Wish I could purchase just that and then I would have a spare.
Fixed my issues
Was experiencing low water flow issues. After ruling out the other causes, it was determined that the diaphragm contained within this unit was likely punctured from pulling in debris over the past 4 years of use (I pull from a lake). Replacing this unit was easy and the unit runs like new again.
GREAT
The hubby took out the old part and put the new one in in no time flat.. works great.....Also it got here much quicker than I expected.
This is the entire Eccotemp gas-water valve for the L10, completely assembled. Please make sure to order the flare fitting that screws onto the gas line if yours cannot be removed from your existing water heater. Always be sure to use pipe tape on the non-flared connections and check for gas leaks before use. If you feel you may need to replace your current gas-water valve assembly, please call Technical Support at 866-356-1992 for advice.
Customer assumes all liability when purchasing replacement parts.
Weight: | 3.00 LBS |
Dimensions | 10.00" x 10.00" x 10.00" |
GTIN: | 1012029 |
SKU: | 1012029 |
Gas/Water valve assembly
Replaced very quickly. Unit back in service. Problem with the old one was the diaphragm. Wish I could purchase just that and then I would have a spare.
Fixed my issues
Was experiencing low water flow issues. After ruling out the other causes, it was determined that the diaphragm contained within this unit was likely punctured from pulling in debris over the past 4 years of use (I pull from a lake). Replacing this unit was easy and the unit runs like new again.
GREAT
The hubby took out the old part and put the new one in in no time flat.. works great.....Also it got here much quicker than I expected.